|Home||» Products||» MOSI2 Heating Element||» L bent MoSi2 heating elements|
L bent MoSi2 heating elements
Two-shank bent elements
Bent elements are used when the electrical connnections for some reason cannot be made above the roof . When the furnace is too high to permit installation of elements suspended from the roof , due to the limitation regarding the maximum permitted heating zone length .it may also be necessary to install elements with bent terminals or heating zones . By installing several rows of such elements it is also possible to control the power at different levels in the furnace .
the terminals are supported by brick or fibre, which normally limits the maximum temperature to 1600 degree C furnace temperature.